Glock Backplate Charging Handle
Ever wanted to have a competition-style glock, but at a more affordable price? Perhaps you're tired of needing to pinch your slide like some commoner?
When using this handle, you'll effortlessly be able to yank that slide back at break-neck speed. And you'll do it in style.
This charging handle can offer an interesting method of charging your airsoft Glock pistol. Instead of pinching the slide, you'll be able to hook your fingers around the handle, and pull back the slide with greater ease.
Usage
Tech Specs
To attach:
Some technical prowess is required to fit this part. You must be comfortable with taking apart your Glock's slide.
1. Remove the slide from the body, and then remove the main spring.
2. After that, take the barrel out. Use a cross-head screwdriver to remove the single screw on the underside of the slide.
3. The rear metal block should pull out along with the existing backplate. Simply pull the backplate off of the metal block, and push the new backplate on, making sure the prongs align with the holes.
4. Slide the metal block back into place, screw in the phillips-head screw, and replace the barrel, spring, and slide back into their original positions.
To remove:
Disassemble the in the same fashion to replace the charging handle with the original backplate.
This is available in both left and right-handed configurations.
Right-Handed configuration had a handle that points outward to the left side of the gun, designed to be operated by your left hand.
Left-Handed configuration had a handle that points outward to the right side of the gun, designed to be operated with your right hand.
The backplate should fit into most models of KWA/KSC/ASG Glock.
Length of knurled handle: 30mm.
A physical print-out of installation instructions are included with purchase.
| Materials: PLA-ST or PA12CF (Carbon fibre nylon).
| Average print-time: >1 hour.
| Average post-processing/assembly time: >1 hour.
| Average turnaround time: 1-3 days.
Material Options
PLA-ST
CF-Nylon
Super-Tough Polylactic
Acid + Calcium Carbonate
+ Acrylic Resins
Polyamide (Nylon)-12
+ 20% Carbon Fibre
content
- Great for casual airsofters who attends games one in a while.
- Suitable for lower-itensity applications.
- Will be affected by hot environments. (Withstands temps up to 60°C before deformation)
- Perfect for cosplayers.
- Has a smoother satin finish.
- Less expensive option.
- Great for power-users looking for a tougher product.
- Suitable for intense airsofters seeking sturdy equipment.
- More resistant to hot temperatures. (Withstands temps up to 176°C before deformation)
- Expected to be used very regularly.
- Has a rougher matte finish with a slight grey hue.
- More expensive option.
