"The Administrator" Ammo Counter

Back in stock with V7! New improvements: -Integrated the chronograph and charging circuits into the main unit, -Fixed issues with some USB-C cables not working, -Smaller-profile cables now used, -Improved button tactility, -Fixed a bunch of firmware bugs, -Optional steel insert for handling bigger accessories.  |

Ever spent 5 minutes during an airsoft skirmish dry-firing at people like a moron without realising you were out of ammo?

With "The Administrator" Ammo Counter, you'll always keep an accurate track of every BB that flies down your barrel!

Designed to fit onto any 20mm rail, this playing companion will give you the edge when it comes to detecting gun faults, keeping track of ammo, preventing dry-firing, and looking totally sci-fi on the field.

An all-new iteration of the Ammo Counter: "The Administrator" (V7) Ammo Counter. There's been numerous design improvements since the last version. Including: Full-colour display, larger display resolution, more powerful and faster processor, smaller size, larger battery, customisable interface, BB-Dump function, Help menus, Chronograph, and RPS measurement, larger buttons, and much more! It's now lower profile and an overall smaller package than before!

Main Features:

• Keep track of the amount of BBs left in your magazine.
• Supports magazine sizes from 1 to 9999.
• One-touch reload button to reset any counters.
• Count either up or down.
• Rechargable 600mAh battery, charged with a USB-C cable (not included).
• 10 save-able presets, which will support up to 10 different mags/guns.
• Does not count dry-firing, so it will always keep an accurate count.
• Self-illuminated display, with adjustable brightness.
• Comes with spare screen protector.
• Low rail profile (30mm) so optics can be used behind unit.
• Supports up to 40-50rps.
• Customise display orentation, mount it in any direction.
• Comes with a charging/chronograph feature to measure shot power, and RPS.
• Comes with 50cm of JST-PH cabling to connector display module to sensor module.
• Customisable interface: colours schemes and interface design can be changed.
• Small profile, Display Unit: 36mm (W) x 35mm (H) x 61mm (L). Sensor Unit: 32mm (W) x 32mm (H) x 64mm (L).
• Plug & Play system; no connections needed to the internals of your gun.
• Ammo dumping and saving features; account for lost BBs on mag pull, and save your count when powering-off.

What is the steel insert and should I get one?

• The optional steel insert is a stainless steel 3D printed part that goes through the core of the sensor for added strength. If you're planning to run large accessories such as suppressors or tracer units on the end of the sensor, then it's recommended to add this to the unit to make sure you have maximum strength, and that nothing will snap while playing! If you plan to use to run no extra accessories, or only small ones such as flash hiders, then you won't need the steel insert.

Not included:

• USB-C cable.
• 2.5mm Hex-head drive or Allen Key.
• 1.5mm Hex-head drive or Allen Key. (For replacing protective acrylic)

Materials: PLA+, Stainless Steel, Acrylic, Steel bolts
Average print-time: 7 hours
Average finishing/assembly-time: 1-2 hours
Average turn-around: 3-7 days